Side Entry Mixer HPS Series | CFG Mixers

  • For deposits of 3 to 500 m3.
  • Horizontal agitation for various applications.
  • Speed ​​from 100 to 300 rpm.
  • Motors from 1.5 to 45 kW.
  • Three-bladed axial profile type “S” or type “J”.
  • Propeller diameter from 200 to 1200 mm.
  • Maximum shaft length 1800 mm.
  • Reducer of parallel shafts, of conical gear or coaxial of helical gears.
  • Sealing system.
  • Carbon steel.
  • AISI 304.
  • AISI 316L.
  • Duplex.
  • Super Duplex.
  • Uranus B6.
  • Titanium.
  • Hastelloy.
  • PTFE.
  • PVDF.
  • EPDM.
  • Halar.
  • Butyl rubber.
  • Ebonite.
  • Fiberglass.
  • Special paints according to specification.
  • Wide range of seals, of various materials, simple or double lip.
  • Hydraulic labyrinth.
  • Cable glands.
  • Simple mechanical seal.
  • Double mechanical seal.
  • Optional: autonomous refrigeration system (thermosyphon), vapor barrier.
  • Cartridge with double mechanical seal and built-in guide bearing.
  • Special systems for dismantling a full tank for horizontal agitators, or dismantling with a pressure reactor for vertical agitators.
  • ATEX motors for explosive area.
  • Special paints.
  • Special certifications (NOM).
  • ANSI or DIN flange adaptation.
  • Square plate.
  • Flange with emergency closure.
  • Sanitary polishing or with roughness specification.
  • FDA regulation.
  • EHEDG regulation..