Pneumatic Mixers VNP Series| CFG Mixers

  • For tanks from 0.05 up to 5 m3.
  • Designed for mixing moderate viscosity products.
  • For applications where there is no access to electrical current or processes with an explosive atmosphere.
  • 100 to 500 RPM output speed.
  • Pneumatic motors.
  • Propeller with axial type “S” profile.
  • Propeller diameter from 150 to 500 mm.
  • Maximum shaft length 1,500 mm.
  • Coaxial or bevel gear reducer.
  • Carbon steel.
  • AISI 304 STAINLESS STEEL.
  • AISI 316L STAINLESS STEEL.
  • Duplex stainless steel.
  • Super Duplex stainless steel.
  • Uranus B6.
  • Titanium.
  • Hastelloy.
  • PTFE.
  • PVDF.
  • EPDM.
  • Pulling.
  • Butyl rubber.
  • Ebonised.
  • Fiberglass.
  • Special paints according to specification.
  • Wide range of seals of several materials, single or double lip.
  • Hydraulic labyrinth.
  • Cable glands.
  • Single mechanical seal.
  • Double mechanical seal.
  • Optional autonomous cooling system (thermosyphon), vapor barrier.
  • Double mechanical seal cartridge and incorporated guide bearing.
  • Special systems for full tank dismantling for horizontal mixers or dismantling with a pressure reactor for vertical mixers.
  • Motors for ATEX explosive atmospheres.
  • Special paints.
  • Special certifications (NOM).
  • ANSI or DIN flange adaptor.
  • Square plate.
  • Flange with emergency closure.
  • Sanitary polished or with surface roughness specification.
  • FDA compliant.